The Baer Tracker adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8 inch heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated.

875 inch of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!

Features and Benefits:

• Direct bolt on upgrade
• Black E-Coated for Rust Protection
• Fully adjustable
• Simple installation
• Tapered pin for No spindle modifications
• Vehicle specific

Ships in 1 Box

Tracker tie rod set Front 1973-1977 GM A-Body OE spindles Notes With OE spindle/Tracker tie rod set Front 1971-1972 GM A-Body With B-Body spindle conversion Notes With B-Body spindle conversion/Tracker tie rod set Front 1980-1981 GM Camaro V6 Notes 6 cyl only/Tracker tie rod set Front 1976-1981 GM Firebird All Notes With OE spindle/Tracker tie rod set Front 1975-1975 GM Firebird All Notes 2nd design, with OE spindle 8.75 inch eye of ball to end of sleeve

Details:

• Adjustable: Yes
• Adjusting Sleeve Included: Yes
• Adjustment Range: 0.875
• Applications: 1975 Pontiac Firebird with stock spindles Note: There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for the late design with OE outer end measuring 8.750 Inch from center of bowl to end of tie rod., 1973-77 GM A-Body cars with stock spindles, 1976-81 Pontiac Firebird with stock spindles, 1971-72 GM A-Body cars with GM B-Body spindles, 1980-81 Chevrolet Camaro 6 cylinder only with stock spindles
• Axle: Front
• Box Count: 1
• Castle Nut Included: No
• Color: Black
• Cotter Pin Included: No
• Dust Boot Included: No
• Emission Code: 6
• End 1 Gender: Female
• End 2 Gender: Female
• Export Description: Suspension Components
• Finish: Black e-coated
• Grade Type: Premium
• Grease Fitting Included: No
• Greaseable: Yes
• Head Drive Type: Hex
• Heim Joint: Teflon lined 5/8” heim joint
• Housing Material: 6061 T-6 Aluminum
• Includes: 2x Tie Rods
• Inner Sleeve Thread Size: 11/16 Inchx18 Lh Thread
• Locking Nut Included: Yes
• Manufacturer Restriction: None
• Mounting Hardware Included: Yes
• Outer Sleeve Thread Size: 5/8 Inchx18 Rh Thread
• Pre-Greased: Yes
• Quantity: 1
• Reinforced: Yes
• Sleeve Length: 9.7
• Steering Type: Manual
• Thread Direction: Right Hand Thread
• Tie Rod Material: 6061 T-6 Aluminum
• Tube Diameter: 5/8 Inch
• Type: Straight
• Washer(s) Included: Yes