A helmet fan is only as reliable as the wire feeding it, and a hand-spliced lead is usually the first thing to fail once heat and vibration go to work. QuickCar's Helmet Fan Harness arrives as a finished assembly, so the connection from switch panel to fan is one less thing to think about mid-race. Red positive and black negative conductors are soldered and bound together in heat shrink for the strongest possible connection.

The 7 Foot harness comes with a preinstalled #10 eyelet for the toggle switch or circuit breaker and a 5/16 Inch eyelet for ground.

Features and Benefits:

• Wiring Harness - Helmet Fan, 7 Foot 50-001
• QuickCar's Helmet Fan Harness attaches a helmet fan installed in the drivers cockpit to the switch panel. Two wires, Red for Positive (+) and Black for Negative (-) professionally tied together in heat shrink and soldered to provide the best connection possible. Comes with preinstalled #10 eyelet to connect to a toggle switch/circuit breaker, 5/16 Inch eyelet for ground, and a 2 pin WeatherPack with opposite end to be installed on fan. All terminals come soldered with heat shrink/seals.
• Professionally soldered and heat shrink-wrapped wires.
• Preinstalled #8 eyelet for connection to a toggle switch/ circuit breaker.
• 5/16 Inch eyelet for ground connection.
• 2-pin Weatherpack connector with opposite end ready for installation on the fan.

Details:

• Size: 7 Foot
• Pins: 2 Pins
• Sold As: Each